How to Reset a Samsung Dryer Control Board: A Comprehensive Guide

Have you noticed that your Samsung dryer is not functioning as expected? It might be due to a resettable control board. This article will guide you through the troubleshooting process to reset the control board and restore your dryer's performance. Follow the steps below to conduct a basic reset and identify any deeper issues that might require professional assistance.

Step-by-Step Guide to Resetting a Samsung Dryer Control Board

If your Samsung dryer is experiencing issues, following these simple steps can help you reset its control board and possibly resolve the problem:

Step 1: Unplug the Dryer

The first step is to disconnect your dryer from the power source. You can do this by unplugging it from the wall outlet. If you are unable to reach the plug, you can turn off the circuit breaker for the dryer. This action ensures that no electrical current is flowing to the dryer, which is essential during the reset process.

Step 2: Wait for 5 to 10 Minutes

After unplugging the dryer, leave it disconnected for a minimum of 5 to 10 minutes. This waiting period allows the control board to reset fully, ensuring that all of its components are reinitialized.

Step 3: Plug the Dryer Back In

After the waiting period, plug the dryer back into the outlet or turn the circuit breaker back on. This action powers the dryer back up and allows you to check if the control board has reset successfully.

Step 4: Perform a Control Board Reset

For many Samsung dryer models, you can perform a reset by pressing and holding the “Start/Pause” button for about 5 seconds. This step forces the control board to enter a reset mode, ensuring that all settings and functions are restored to their default state.

Step 5: Test the Dryer

Once the dryer is powered back on, select a cycle and start the dryer to see if the control board has reset and is functioning properly. If the issue is resolved, your dryer should now work as expected. If the problem persists, it might be time to consult the dryer's owner’s manual or seek professional assistance.

Additional Troubleshooting Tips

Even if the control board reset does not solve the issue, there are other steps you can take to diagnose and potentially resolve the problem:

Check for Error Codes

If you are receiving error codes, consult your dryer's owner's manual for specific troubleshooting instructions. The manual may provide detailed guidance on how to interpret the error codes and how to fix the issue.

Maintain Proper Lint Trap and Exhaust System

Clean the Lint Trap: Ensure that the lint trap in your dryer is free of debris and that it is clean. A clogged lint trap can cause the dryer to malfunction and display error codes.

Check the Exhaust Vent Hose: Verify that the exhaust vent hose is not crushed or kinked. A crushed or obstructed hose can restrict airflow and cause the dryer to malfunction.

Clear the Outside Vent: Ensure that the outside vent is not blocked by any objects such as leaves, nests, or debris. A blocked vent can cause the dryer to overheat and display error codes.

Check Inside the Exhaust Hose for Clogs: If possible, check inside the exhaust hose for any signs of a clog. A clogged hose can lead to similar issues as a clogged lint trap and exhaust vent.

Conclusion

By following these steps, you can reset a Samsung dryer control board and resolve a wide range of issues. Remember to always refer to your specific dryer model's manual for detailed instructions. In case the problem persists, consider seeking professional assistance to ensure the longevity and efficiency of your dryer.