How Hard Is It to Manufacture a Glock Switch: A Comprehensive Guide

Creating a Glock switch, a small auto sear device that can convert a Glock pistol into a machine pistol, might seem like a daunting task, especially for those with limited experience in machining. However, with the right tools and a bit of expertise, it is indeed feasible. This guide will walk you through the process, highlight the legal considerations, and provide alternative solutions.

Introduction to the Glock Switch

The Glock switch is a small mechanism that, when installed into a Glock pistol, essentially transforms it into a machine pistol capable of bypassing the pistol’s semi-automatic nature. This can involve converting the pistol to full automatic fire, making it much more powerful and dangerous. However, it is essential to acknowledge that such modifications can be illegal in many jurisdictions.

Manufacturing the Glock Switch

The process of manufacturing a Glock switch can be broken down into a series of manageable steps. Without specialized equipment and detailed knowledge, this can be a challenging project for the average person.

Simple Techniques for Molding Metal Parts

Molding the metal parts of the switch can be done through various methods. One approach involves using JB Weld mixed with acetone to pour into a previously melted plastic mold. Here’s a straightforward guide:

Print or acquire the blueprints for the Glock switch.

Create a mold with the desired outline of the metal part.

Place the plastic mold in an oven and melt out the plastic at 450 degrees.

Mix JB Weld with acetone to create a pourable mixture.

Pour the mixture into the mold where the plastic used to be.

Allow the mixture to cool and harden, then carefully remove the mold.

Lightly sand the metal part for smooth operation.

Alternative Method: For those who prefer not to use molds, you can also make the parts by hand or directly purchase a processed one. Detailed instructions and blueprints can be found online to guide you through the process.

Legal Considerations and Risks

It is crucial to consider the legal ramifications of manufacturing and installing a Glock switch. Federal laws may categorize the modification as a violation, and possessing such a switch could result in severe penalties, such as a 20-year sentence in prison. Before proceeding, it is highly recommended to consult with an attorney.

Conclusion and Alternatives

While it is possible to create a Glock switch with some patience and basic tools, it is important to weigh the risks and legal implications. If you are interested in converting your Glock for select fire capabilities, there are other, legal alternatives available. For full automatic capabilities, consider using an aftermarket rear plate, as discussed in the guide above.

Overall, the process of manufacturing a Glock switch is not as difficult as it might seem. However, it is always best to exercise caution and comply with the law to ensure your safety and that of others.